As a family, coronaviruses are common across the globe. This safety short...
MORE INFOAs a family, coronaviruses are common across the globe. This safety short outlines some of the control measures that can be taken to prevent their spread.
RUNNING TIME: 2 Minutes
Face Masks are an effective control measure that can be used to control...
MORE INFOFace Masks are an effective control measure that can be used to control the spread of Coronaviruses. This safety short gives a quick overview of common mask types and how to use them correctly.
RUNNING TIME: 4 Minutes
In simple terms a risk assessment requires the identification of workplace...
MORE INFOIn simple terms a risk assessment requires the identification of workplace hazards and an evaluation of the risks they present.
The purpose of an overall workplace risk assessment is to establish whether the level of risk arising from workplace activities is acceptable, or whether additional measures need to be taken to control workplace hazards to further reduce or remove unacceptable risks.
The program includes the following Elements of a Risk Assessment:
Regardless of the hazards present, the proper application of the risk assessment process will result in a safer workplace.
RUNNING TIME: 18 minutes
What is manual handling? Simply, manual handling is the movement of items...
MORE INFOSimply, manual handling is the movement of items by human energy.
Manual handling includes lifting, holding, pushing, pulling, shifting and lowering. In fact, any form of human exertion could be included – with or without the use of mechanical aids.
The steps to deal with manual handling can often be addressed by following through a series of questions. This process, the hierarchy of control measures asks the following:
Manual handling contributes directly to a significant percentage of work related accidents and injuries. Manual handling is an issue that must be addressed as an ongoing subject in the workplace.
RUNNING TIME: 12 Minutes
There are laws and regulations that require the investigation and...
MORE INFOThere are laws and regulations that require the investigation and reporting of certain types of accidents. Insurance requirements also lead to many Accident Investigations as do potential claims at common law. However, from an Occupational Health & Safety point of view, the main aim of Accident Investigations is not to fulfil these legal and insurance obligations, but rather to prevent recurrences of the same or similar accidents.
Accident Investigations therefore should be regarded as an important part of accident prevention.
This program covers:
Learning why and how accidents occur is fundamental to making improvements in both working conditions and operational methods.
The Accident Investigation process will reduce the number of workplace accidents and should be regarded as an important component of any workplace health and safety strategy.
RUNNING TIME: 12 Minutes
Some workplace hazards are obvious: when there is a risk of physical...
MORE INFOSome workplace hazards are obvious: when there is a risk of physical injury in the workplace, it can be relatively easy to identify and address. But work can also carry risks to mental health.
This program examines the various ways stress can affect members of an organisation as well as potential methods for combatting it.
Topics included in the program:
Work-related stress is not always the easiest of workplace hazards to identify. But being aware of the potential risks, and moving pro-actively to prevent stress taking hold, will help minimise the chances of stress-related illness.
RUNNING TIME: 11 Minutes
An Angle Grinder, sometimes called a side or disc grinder is a handheld...
MORE INFOAn Angle Grinder, sometimes called a side or disc grinder is a handheld power tool commonly used for cutting, grinding and polishing.
The use of angle grinders can be extremely dangerous. If incorrectly used, angle grinder discs can shatter causing projectiles to fly violently through the air hitting the operator and others in the work area.
This program includes:
This program is aimed at professional and non-professional operators of Angle Grinders as a safety and operational guide.
RUNNING TIME: 9 Minutes
The use of angle grinders can be extremely dangerous, posing a risk not only...
MORE INFOThe use of angle grinders can be extremely dangerous, posing a risk not only to the operator but to others in the work area. This safety short gives you some checks that should be performed before operating an angle grinder.
RUNNING TIME: 1 Minute
Chainsaws are used extensively by a wide range of people in many...
MORE INFOCircular saws are used extensively for a variety of cutting...
MORE INFOCircular saws are used extensively for a variety of cutting operations. This safety short gives you a quick overview of how to operate a circular saw.
RUNNING TIME: 1 Minute
Compressed air is not ‘just air’, it is air travelling in an intense...
MORE INFOCompressed air is not ‘just air’, it is air travelling in an intense stream at a high velocity. Exposure to it can result in severe injuries or even fatality. This safety short gives you a quick overview of the do’s and don’ts when using compressed air.
RUNNING TIME: 2 Minutes
In the control of a skilled person Electrical Power Tools show their...
MORE INFOIn the control of a skilled person Electrical Power Tools show their flexibility and their speed.
This program shows operators how to get the best out of their Power Tools and how to use them effectively and safely.
The tools covered in this program include:
Topics discussed in this program include:
This program is aimed at professional and non-professional operators of Electric Power Tools as a safety and operational guide.
RUNNING TIME: 15 Minutes
The only way to get the best out of your power tools is to make sure you...
MORE INFOThe only way to get the best out of your power tools is to make sure you know how to use them effectively and safely. This safety short gives you some safety essentials that should be considered when operating a power tool.
RUNNING TIME: 3 Minutes
Basic Hand Tools are the most common equipment used throughout industry. ...
MORE INFOBasic Hand Tools are the most common equipment used throughout industry. However the correct, efficient and safe use of Hand Tools is sometimes lacking in the workplace.
This program shows techniques and safe work practices relating to a wide range of basic Hand Tools including:
This program is aimed at all users of basic Hand Tools, whether they be students or experienced trades people who may require a refresher on safe and correct usage.
RUNNING TIME: 15 Minutes
Hand held power tools, hand guided equipment, and holding materials being...
MORE INFOHand held power tools, hand guided equipment, and holding materials being worked by hand feed machines, can all transmit vibrations to the hands and arms. Regular exposure to hand-arm vibration can lead to what is known as hand-arm vibration syndrome, also referred to as HAVS.
The symptoms and effects of HAVS most commonly result in:
Symptoms usually last for a short time, however, with continued exposure to vibration the symptoms may have longer lasting effects, and with time, usually a few years, could become permanent, causing ongoing pain.
Awareness of the problem of hand-arm vibration syndrome, a commitment to identify hazards and reduce risk levels, combined with an individual commitment to health and safety, will help prevent HAVS issues occurring.
RUNNING TIME: 7 Minutes
Today, the metal trade is one of the cornerstones of our industrial...
MORE INFOToday, the metal trade is one of the cornerstones of our industrial society. Correct, efficient and safe use of metalworking tools is essential throughout the metal industry.
This program shows the correct and safe use of a wide range of metalworking
tools and includes:
This program is aimed at all users of basic Metalwork Tools, whether they be students or experienced trades people who
may require a refresher on safe and correct usage.
RUNNING TIME: 19 Minutes
Off-hand Grinding machines are widely used throughout industry, but safe and...
MORE INFOOff-hand Grinding machines are widely used throughout industry, but safe and correct use of these machines can be overlooked. This program shows how to operate an off-hand grinding machine safely and efficiently.
This program includes:
This program is aimed at professional and non-professional operators of Off-Hand Grinding machines as a safety and operational guide.
RUNNING TIME: 19 Minutes
Power drills are versatile tools which can drill a variety of materials...
MORE INFOPower drills are versatile tools which can drill a variety of materials ranging from wood to steel. This safety short gives you a quick overview of how to operate a portable drill.
RUNNING TIME: 2 Minutes
Compressed air is an energy source used to power tools and equipment in a...
MORE INFOThe chainsaw can be an extremely dangerous tool if not operated...
MORE INFO