As a family, coronaviruses are common across the globe. This safety short...
MORE INFOAs a family, coronaviruses are common across the globe. This safety short outlines some of the control measures that can be taken to prevent their spread.
RUNNING TIME: 2 Minutes
Face Masks are an effective control measure that can be used to control...
MORE INFOFace Masks are an effective control measure that can be used to control the spread of Coronaviruses. This safety short gives a quick overview of common mask types and how to use them correctly.
RUNNING TIME: 4 Minutes
In simple terms a risk assessment requires the identification of workplace...
MORE INFOIn simple terms a risk assessment requires the identification of workplace hazards and an evaluation of the risks they present.
The purpose of an overall workplace risk assessment is to establish whether the level of risk arising from workplace activities is acceptable, or whether additional measures need to be taken to control workplace hazards to further reduce or remove unacceptable risks.
The program includes the following Elements of a Risk Assessment:
Regardless of the hazards present, the proper application of the risk assessment process will result in a safer workplace.
RUNNING TIME: 18 minutes
What is manual handling? Simply, manual handling is the movement of items...
MORE INFOSimply, manual handling is the movement of items by human energy.
Manual handling includes lifting, holding, pushing, pulling, shifting and lowering. In fact, any form of human exertion could be included – with or without the use of mechanical aids.
The steps to deal with manual handling can often be addressed by following through a series of questions. This process, the hierarchy of control measures asks the following:
Manual handling contributes directly to a significant percentage of work related accidents and injuries. Manual handling is an issue that must be addressed as an ongoing subject in the workplace.
RUNNING TIME: 12 Minutes
There are laws and regulations that require the investigation and...
MORE INFOThere are laws and regulations that require the investigation and reporting of certain types of accidents. Insurance requirements also lead to many Accident Investigations as do potential claims at common law. However, from an Occupational Health & Safety point of view, the main aim of Accident Investigations is not to fulfil these legal and insurance obligations, but rather to prevent recurrences of the same or similar accidents.
Accident Investigations therefore should be regarded as an important part of accident prevention.
This program covers:
Learning why and how accidents occur is fundamental to making improvements in both working conditions and operational methods.
The Accident Investigation process will reduce the number of workplace accidents and should be regarded as an important component of any workplace health and safety strategy.
RUNNING TIME: 12 Minutes
Some workplace hazards are obvious: when there is a risk of physical...
MORE INFOSome workplace hazards are obvious: when there is a risk of physical injury in the workplace, it can be relatively easy to identify and address. But work can also carry risks to mental health.
This program examines the various ways stress can affect members of an organisation as well as potential methods for combatting it.
Topics included in the program:
Work-related stress is not always the easiest of workplace hazards to identify. But being aware of the potential risks, and moving pro-actively to prevent stress taking hold, will help minimise the chances of stress-related illness.
RUNNING TIME: 11 Minutes
Hepatitis B, Hepatitis C and HIV are three Bloodborne Diseases which are a...
MORE INFOHepatitis B, Hepatitis C and HIV are three Bloodborne Diseases which are a concern in the workplace, but what is a Bloodborne Disease? How can it be passed from one person to another? What can you do to reduce your risk of exposure? And what should you do if you may have been exposed to a Bloodborne Disease?
This program covers:
The objective of this program is to increase awareness of Bloodborne Pathogens and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.
Bloodborne Pathogens can cause disease but the risks should not be overdramatised. Following procedures that have been laid down will go a long way to protect you from infection.
DURATION: 15 Minutes
When attempting to provide a safe workplace, it is important to consider...
MORE INFOWhen attempting to provide a safe workplace, it is important to consider everybody who will set foot in that workplace or on it’s grounds. This includes, not only regular staff members but also contractors and sub-contractors.
When planning a project that involves contractors, health and safety must be part of that planning.
This program covers:
Communication between managers, contractors and all staff is a necessity to keep everyone not only productive, but safe.
RUNNING TIME: 11 Minutes
At the beginning of the job, contractors, along with everyone doing work in...
MORE INFOAt the beginning of the job, contractors, along with everyone doing work in the location, should receive a safety induction. This safety short gives you a quick overview of what a safety induction is and what information should be included in it.
RUNNING TIME: 3 Minutes
Consideration of health and safety issues must begin at the planning stage,...
MORE INFOConsideration of health and safety issues must begin at the planning stage, before the contractor has started work. This safety short covers some important questions that should be asked when planning work for a contractor and potential hazards a contractor may encounter.
RUNNING TIME: 5 Minutes
One of the most important considerations in contract management is so-called...
MORE INFOOne of the most important considerations in contract management is so-called “task creep”. This can occur when, after the contractor’s task is assigned, the job requires more work than was originally agreed. This safety short briefly explains what ”task creep” is and why it’s an important consideration.
RUNNING TIME: 1 Minute
Coronaviruses are a large group of viruses that can cause illnesses ranging...
MORE INFOCoronaviruses are a large group of viruses that can cause illnesses ranging from the common cold to more severe diseases. This safety short examines the various ways in which Coronaviruses can be spread.
RUNNING TIME: 1 Minute
Coronaviruses are a large group of viruses that can cause illnesses ranging...
MORE INFOCoronaviruses are a large group of viruses that can cause illnesses ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS).
As a family, coronaviruses are common across the globe. Recently, a new strain of coronavirus was discovered that has not previously been identified in humans. This new coronavirus, sometimes referred to as the novel coronavirus, leads to Coronavirus disease, also known as COVID-19.
This program covers:
The objective of this program is to increase awareness of Coronaviruses in general, and COVID-19 more specifically, and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.
Following procedures that have been laid down will go a long way to protect you from infection.
RUNNING TIME: 10 Minutes
As a family, coronaviruses are common across the globe. This safety short...
MORE INFOAs a family, coronaviruses are common across the globe. This safety short outlines some of the control measures that can be taken to prevent their spread.
RUNNING TIME: 2 Minutes
There are numerous injuries that can occur in the workplace and amongst the...
MORE INFOThere are numerous injuries that can occur in the workplace and amongst the most common are Cuts and Bleeding. These can range from small scratches through to serious cuts, embedded objects, amputations and injuries that can lead to internal bleeding.
Many bleeding incidents are not severe and can be treated with simple first-aid and the body’s own ability to clot. Some are more serious and require urgent action. Serious bleeding that is not stopped quickly is life threatening.
This program covers:
The objective of this program is to highlight the major hazard areas associated with Cuts and Bleeding and by so doing, increase awareness of the standards for worker responsibility in observing and being active in daily safety procedures.
RUNNING TIME: 9 Minutes
Face Masks are an effective control measure that can be used to control the...
MORE INFOFace Masks are an effective control measure that can be used to control the spread of Coronaviruses. This safety short gives a quick overview of common mask types and how to use them correctly.
RUNNING TIME: 4 Minutes
Our feet provide us with balance and support for our bodies and enable us to...
MORE INFOOur feet provide us with balance and support for our bodies and enable us to walk, run, drive, operate machinery, play sport and so on.
This program addresses:
Falling objects cause the largest number of foot injuries in the workplace, there are however numerous other potential hazards that can lead to injuries.
This program is aimed at all personnel who may come into contact with any of these hazards.
RUNNING TIME: 10 Minutes
Many of the tasks we perform involve the use of our hands. Because of the...
MORE INFOMany of the tasks we perform involve the use of our hands. Because of the versatile nature of our hands we are constantly putting them at risk.
And, in order to reduce that risk, it is critical that we are aware of what hazards exist and we know what measures we should take to help prevent accidents from occurring.
This program covers:
By following safe work procedures, using tools only for their intended purposes and wearing personal protective equipment whenever appropriate, we can reduce the number of hand injuries dramatically.
RUNNING TIME: 12 Minutes
Effective hand washing technique is crucial in helping avoid infectious...
MORE INFOEffective hand washing technique is crucial in helping avoid infectious diseases and maintaining good health. This safety short gives you a quick overview of how to thoroughly clean your hands.
RUNNING TIME: 1 Minute
Hand held power tools, hand guided equipment, and holding materials being...
MORE INFOHand held power tools, hand guided equipment, and holding materials being worked by hand feed machines, can all transmit vibrations to the hands and arms. Regular exposure to hand-arm vibration can lead to what is known as hand-arm vibration syndrome, also referred to as HAVS.
The symptoms and effects of HAVS most commonly result in:
Symptoms usually last for a short time, however, with continued exposure to vibration the symptoms may have longer lasting effects, and with time, usually a few years, could become permanent, causing ongoing pain.
Awareness of the problem of hand-arm vibration syndrome, a commitment to identify hazards and reduce risk levels, combined with an individual commitment to health and safety, will help prevent HAVS issues occurring.
RUNNING TIME: 7 Minutes
In many workplaces the potential for the inhalation of hazardous...
MORE INFOMost of our activities take place above ground level. In fact, many occur...
MORE INFOMost of our activities take place above ground level. In fact, many occur between 1 and 2 metres above the ground and frequently much higher........This puts the head in the firing line of many potential hazards.
Hazards that include:
Types of injuries include:
The preventative measures that need to be addressed are covered in detail. A head injury could be the first, the worst and last injury you will ever receive.
RUNNING TIME: 10 Minutes